KSG Armory Concord Magazine Carrier


KSG Armory

An IWB magazine carrier, excellent for appendix carry, ride height adjustable, mag seat depth adjustable, ambidextrous.

Mag carrier is ambidextrous, selecting right or left below will tell us on which side to install the hardware

SKU: ksg-magcarrier3 Category: Tags: , , , , , , , , , Brand:


UPDATED Sept. 2023! The Concord is now made with more exacting tolerances and is AMBIDEXTROUS so that it can be set up for either right or left hand use. 

When you set a magazine high enough to grab it easily, it often wants to tip out, especially when carried up front to balance out your AIWB holster.  This one solves that problem and provides a lot of flexibility in terms of retention, cant, belt ride height, and mag seat depth.

The Concord is made from the highest quality materials and is hand-crafted here in the USA.

Maximum Adjustability

Adjustable Retention. Your Concord mag carrier is made specific to your magazine, but in order to maximize your ability to use it with magazines of other firearms you own, the retention is adjustable with a simple retention screw.

Adjustable Cant. Regardless if you choose the PTD Soft Loop or DCC Clip both are able to be adjusted for cant angle, so you can adjust your magazine pouch to the angle you feel maximizes concealment and efficient access. The DCC clips are available for both 1.5″ and 1.75″ belt widths.

Adjustable Magazine Depth. How “deeply” the magazine sits inside the Concord Mag Carrier is actually adjustable with a screw and rubber washer “stop” that goes through the inside of the mag carrier itself. Adjust it higher or lower on the mag carrier to impact the magazine depth.

Adjustable Ride Height. The Concord can sit lower or higher in your pant as needed by adjusting the attachment point of the clip or soft loop to the mag carrier. Several height options are built in.

Belt Attachment Options

With the Concord Mag Carrier, you can choose between either a PTD Soft Loop or a DCC cant-adjustable clip. The Soft Loop can be adjusted for various belt sizes including 1.25″, 1.5″, and 1.75″ belts.

1.5″ and 1.75″ DCC clips are also available as an option.

Selecting Your Firearm – Not Listed?

The Concord IWB Magazine Pouch can easily fit most double-stack 9mm or .40 magazines. During the manufacturing process, we fit the mag carrier to the magazine you indicated when you ordered. Since so many magazines are very similar in size and the Concord IWB Mag Carrier has adjustable retention you have some flexibility in terms of the size of the magazine that can be accommodated.

However, that doesn't mean that the Concord is a one-size-fits-all solution by any means.

If your firearm is not on the list provided then you can do some research and identify what magazine that IS on our list is the same dimensionally or close to the same as your firearm. Alternatively, you can select “Other Double Stack 9mm/.40” and indicate in the order notes what firearm you have and we can try to mold the mag carrier as close as possible to your firearm's magazine.

If you have concerns about fit beyond what has been described above, please email us first.


Additional information

Weight 2 oz
Dimensions 11 × 6.5 × 2.3 cm


There are no reviews yet.

Be the first to review “KSG Armory Concord Magazine Carrier”

Your email address will not be published. Required fields are marked *