Holds multiple sized paper targets on one stand with no mechanical adjustment. Just move the vertical uprights to gain correct target width. Target Stand Width Options: 6” 7” 8” 10” 12” 14” 16” 18” 20” 23” 24”
Moving traditional target stands is a pain because you have to effectively disassemble the sticks from the base before moving it. Not with HatPoint. These target stands have retention clips that hold your sticks in place so you can just grab any piece and pick it up and move it where you want it.
The Hat Point stand is optimized to work with 1x2 sticks which have become prevalent and common place industry wide for target stands and can be found affordably at any local hardware store.
Designed to take a lot of errant rounds before function is lost. Manufactured using impact resistant polymer to create the lightweight and robust design.
For too long we have all be lugging around heavy target stands that scratch the bed of the pickup, end up as rust buckets after a year or so, and suck to haul around.
With HatPoint the footprint is minimal, they are lightweight, impact resistant, and won't scratch anything.
Dealing with some wind? Not problem Hat Point stands have 5 potential stake holes built into the design. Just pick up standard stakes available from any hardware store and drive them down into the ground for absolute wind resistance.
© Copyright 2026. All rights reserved
