If there is one thing I love to do, it's challenge the status quo. And, if someone tells me that I can't do something I'm going to find a way around it so I can do it. That's one of the reasons why I joined the Marines instead of the Chair Force (no offense, fly boys).
I was told (by several family members) that I couldn't hack it, so I flipped that proverbial bird and joined.
It's also one of the reasons why the number of striker, polymer-framed pistols I own is very limited to a few, and why I carry a revolver several times per week.
So, when someone told me that it was impractical to carry an 8-shot 357 Magnum N-Frame revolver, I laughed. I'm always up to the challenge so I asked Smith & Wesson to send me a 627 Performance Center model that is absolutely gorgeous. No joke, this thing is the epitome of a beautiful handgun.
It wasn't all peaches ‘n cream, though. I actually had an issue with this revolver early on that blew my mind. Before I get there, though, let me tell you who I am and why I feel as though I'm qualified to write this gun review.
My name is Josh, and I'm a gunaholic. More than that, I'm the editor of this fine publication and have been writing about guns for a handful of years. I got my start as a staff-reviewer for guns.com, was the editor at another place that I'll leave unnamed, and freelanced for several other places. But, before that, I was in the Marines and grew up around guns about half the time (while at my dad's house).
I also had a brief stint with law enforcement as a corrections officer, during which time I had to qualify with a 38 special revolver and a 12 gauge shotgun.
Let's move on.
S&W 627 8- Shot for concealed carry —
As it usually happens for us gun reviewers, I've had this gun for way too long. I've actually even moved with it to a totally different state in the Union. I'm not even sure how long I've had it, and I'm sure Smith wants it back. I've got 800 rounds of ammo through this beauty of all different kinds. Hollow points, flat nose, lead round nose, Hornady Lever Evolution, 38 specials, +P, etc. You name it, I shot it. Heck, I even had a few boxes of the G2 Telos in 357 and 38 sent out to me.
This is an oddball gun when it comes to concealed carry, and I felt that when trying to find a holster for it. Remember, I wrote this article from the point of view of someone who is concealing this massive N-Frame revolver. And, believe it or not, I have concealed it on numerous different occasions and hid it well in a JM4 Tactical Quick Click and Carry Roughneck Holster.
I'm really good friends with the owner, Chad, and talk to him a few times a week. Though, I'm not sure how happy he'll be that I wet-formed his holster to this massive revolver.
This is also my bear gun in my newest home, where we have black bears as neighbors. Would I use this against a grizzly? Uh, no. Not really. On a smaller cousin, the black bear, sure. And, if I can't stop it from killing me in 8 shots, I guess I deserve whatever end I may meet.
It should go without saying that using proper ammo in a bear gun, like 180 grain hard cast bullets that actually penetrate a bear is the best option. Your regular hollow points should only be used as a last option, if it's all you've got.
As with all things, having a gun is better than a pointy stick.
I did have a problem with this gun. I hate when this happens and I wish I could just give everyone/everything a glaring, positive review. Sadly, that's not usually the case.
I only had the revolver out twice with about 70 rounds through it when suddenly I couldn't hit my target. I cleared the gun, placed it on the bench, and moved the target closer to me, about 3 yards away. Still barely hitting the paper, nowhere near the bullseye. I took a seat and used my range bag as a rest. I never shoot benched, but I was in diagnostic mode. Still nothing.
It wasn't me, so I looked at the gun.
What I saw was not only baffling, but highly disappointing since this is a S&W Performance Center revolver that I had fallen in love with.
The front sight came loose and was just barely hanging on. I'm confident that if it had fallen completely out, I wouldn't have been able to find it. If I kept shooting that would have been the case. Thankfully, I stopped.
So I called the RSO (range safety officer) over to ask him if he'd ever seen or heard of anything like that, and he couldn't believe it either. So I did what any gun reviewer would do, I reached out to S&W. Here are a few parts of our conversation:
Me to them —
… It was incredibly inaccurate, and when I tried to figure out why, I saw that the front sight moved all the way to the left and was actually very loose to the point I was able to move it freely with my fingers. This is clearly not supposed to happen. Can you forward me to someone who can help? Or, should I just bring it to my local gunsmith? I want to wrap up this review for you guys on concealedcarry.com
The whole thing started out great with my contact from Smith&Wesson, but has since stopped being so great. Here is her initial response to me which came the following day:
Them to me —
… I have sent your email over to Customer Service – someone should reach out to you.
Please note that I'm not including the conversations in their entirety because I had a death in the family right as all this was going on and I was mentioning that in my emails, and she shared her condolences. Then, after about a month of waiting and not hearing from customer service, I sent this out:
Me to them —
… Okay I never heard back from anyone, but I just stuck some locktyte on the front site and that seems to have taken care of the issue.
I have not heard from anyone at S&W since, and I'm not sure why that is. Either way, the Locktyte worked. I had my gunsmith fix it because he is way smarter than I am with that sort of thing, and it has not gotten loose since.
Still, there are a few problems with this whole scenario. First, you'd think that S&W would have been all over trying to make a gun reviewer happy. After all, they have to know that I'm going to be documenting this experience, and I do so at the risk of them never sending me another firearm again. I've never heard of S&W doing that to a gun reviewer, but there are other companies who have.
Second, what happened to customer service? Isn't it supposed to be stellar?
Third, what happened to quality control? What would have happened if the front sight fell off when I needed it? Is this an issue?
I'll leave this alone, but for a revolver with a $1,079.000 MSRP, you'd think they'd pay better attention to detail and at least take care of people.
Other than the front sight, this revolver is gorgeous. Even with that issue I'd buy this gun. In a heartbeat. Street price, by the way, is under $900 in most places. While none of us want the front sight to fall off and we do want customer service to take care of us, it was easy enough to fix by myself and the gun has given me no other issues with hundreds of rounds downrange, to date.
In double action, the trigger is about 11 pounds, but feels smooth and easy to pull with an unmistakable break. As does in most DA revolvers, the trigger resets all the way out. There is no mistaking break or reset. In single action, minimal pressure is needed to send the tear-shaped hammer home, pushing a round down the barrel.
The large revolver fits well in my huge mitts, and while I found myself missing a spot to put my pinky on, the tip of my pinky finger does come back to rest on the backside of the gun's grip. That full, textured grip, along with the 37.8 ounce weight really helps to mitigate felt recoil out of those hotter 357 magnum rounds. For me, recoil out of the 38 specials I used was negligible.
I found that the gun was very concealable, even with its overall width at the largest point being 1.75 inches. The 2.625 inch barrel length definitely helped aid in the ease of concealment. I mentioned a few minutes ago that this has been my black bear gun for when we go on hikes as of late, since we just moved to the Blue Ridge Mountains in NC.
While it's my first goal to avoid bear at all costs, I do feel confident that with the right ammo in this revolver, I'd be able to protect my children should that dreaded time ever come.
Perhaps one of my favorite aspects of this S&W 627 PC 8-shot revolver is that the ejector rod didn't hangup once on the release of empty casings or inserting fresh rounds into the cylinder.
It may sound strange to have the ejector rod be one of my favorite things on this beauty, but I've had revolvers in the past that hang up just a bit in either direction which can make it difficult under stressful reloads.
This PC rod being so smooth aids in unloading and reloading under stress. The ejector rod is of one piece construction with a tight-feeling spring to help return it into home position after the spent casings have been ejected.
As a side note, the ejector rod is usually one of the first things to go in a revolver, and where a huge portion of revolver malfunctions come into play.
The overall looks of the gun are what wowed me when I first opened up the case it came in. I love the un-fluted cylinder of these modern-day wheel guns, and the matte stainless finish pops just enough to bring the right amount of attention while at the range. That, coupled with the simple fact that most folks didn't even know that an 8-shot magnum revolver was a thing, is a conversation starter each time I went.
Over all, I'm happy with this gun. While I wish that the front sight didn't get so loose that it almost fell out, that's my only complaint with it and it seems to be resolved. Still, the following was pulled from the page in all caps just how you see it below:
ALL BACKED BY OUR SMITH & WESSON LIFETIME SERVICE POLICY.
The ball was sadly dropped here, but I honestly don't think this is normal for them. Either way, the gun is gorgeous and accurate when functioning properly. As I mentioned a little while ago I would buy this gun if given the opportunity to do so at a good price.
While many gun publications are accused of being paid shills by the gun companies, it's my promise to you that I'll always push for honest reviews for as long as I'm around. Gun reviewers are ambassadors to gun buyers. It's our first job to make sure you get accurate information and we will never lie in a review. Period.